P3Csi, P3Cmi, P12Csi, And P12Cmi Modules - Extreme Networks Summit Summit1i Hardware Installation Manual

P3cSi, P3cMi, P12cSi, and P12cMi Modules

Figure 127 shows the P3cSi and P3cMi modules.
Figure 127: P3cSi and P3cMi modules
Port
status
LEDs
Figure 128 shows the P12cSi and P12cMi modules.
Figure 128: P12cSi and P12cMi modules
Port
status
LEDs
The P3cSi and P3cMi, Packet over SONET (PoS), modules each have four OC-3 ports that use duplex SC
connectors. The P12cSi and P12cMi PoS modules each have two OC-12 ports that use duplex SC
connectors. The P3cSi and the P12cSi modules support single mode fiber-optic cable only, and the P3cMi
and the P12cMi modules support multimode fiber-optic cable only. These modules connect the switch to
a SONET infrastructure that is used by metropolitan area service providers and operators of server
co-location networks.
Extreme Networks Consolidated "i" Series Hardware Installation Guide
Module status LEDs
Network
interface
ports
Service ports
Module status LEDs
Network
interface
ports
Service ports
Port
status
LEDs
BD_P3
Port
status
LEDs
BD_P12
Configuring I/O Modules
253