Blackdiamond 6800 Series Architecture; Blackdiamond 6816 Switch Front View - Extreme Networks Summit Summit1i Hardware Installation Manual

13
BlackDiamond 6800 Series Switch
Chassis
There are three models in the BlackDiamond 6800 series: The BlackDiamond 6816 switch, the
BlackDiamond 6808 switch, and the BlackDiamond 6804 switch.
This chapter describes:
• BlackDiamond 6800 Series Architecture on page 195
• Installing the Chassis on page 203
- Rack Installation on page 204
- Grounding the BlackDiamond 6800 Series Chassis on page 208
• Removing the Chassis on page 208
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any
BlackDiamond chassis.

BlackDiamond 6800 Series Architecture

This section describes and shows the architecture of the BlackDiamond 6800 series chassis. For each
chassis, the:
• Front view shows an example of a completely installed chassis with optional I/O modules that you
can install in the chassis
• Rear view shows the back of the chassis

BlackDiamond 6816 Switch Front View

The BlackDiamond 6816 switch consists of the following components:
• One 20-slot chassis with backplane
• 16 I/O module slots, labeled slots 1 through 16
• Four MSM64i slots, labeled slots A through D
• Four power supply bays (accessed from the front of the unit)
• Two fan trays (accessed from the front of the unit)
Extreme Networks Consolidated "i" Series Hardware Installation Guide 195