Replacement Messages - Epson AcuLaser C4000 Reference Manual

Replacement messages

When you see the following messages on the LCD panel, or when
notified by the EPSON Status Monitor 3, it is time to replace the
indicated consumable products. You can continue to print for a
short time after a message appears, but EPSON recommends early
replacement to maintain print quality and extend the life of your
printer.
LCD Panel
Message
XXXX* Toner Low
Worn
Photoconductor
Worn Fuser
Worn Transfer Unit
* The letters C, M, Y, and K appear in this position, indicating the color of the toner
to be replaced. For example, the message
toner remaining in the yellow toner cartridge is low.
Note:
Do not replace the toner cartridge when the
message appears. Toner remaining in the toner cartridge may spill
out if you remove the toner cartridge to replace it. Replace the toner
cartridge when the
If you replace the toner cartridge before the
message appears, it is not detected as a new toner cartridge and the
To clear the warning, select
panel's Reset Menu.
250 Maintenance and Transportation
Description
The amount of toner remaining in the indicated toner
cartridges is low.
The photoconductor unit has reached the end of its service
life.
The fuser unit has reached the end of its service life.
The transfer unit is near the end of its service life.
warning may not be cleared.
means that the amount of
message appears.
from the control