Table of Contents
Advertisement
Chapter 11
Maintenance and Transportation
Replacement Messages
When you see the following messages in the LCD panel or the
window of EPSON Status Monitor 3, replace the appropriate
consumable products. You can continue to print for a short time
after a message appears, but Epson recommends early
replacement to maintain print quality and extend the life of your
product.
LCD Panel Message
Worn Photoconductor
Worn Fuser
Worn uuuu Dev Unit
uuuu Toner Low
Note:
To clear the warning, click the
select Reset Menu from Printer Settings, then select Clear All
Warning.
336
Maintenance and Transportation
Description
The photoconductor unit is near the end of
its service life. Replace the
photoconductor unit with a new one.
The fuser unit has reached the end of its
service life. Contact your dealer.
The developer unit has reached the end of
its service life. Contact your dealer. (The
letters C, M, Y, and K appear in place of
uuuu and indicate the colors Cyan,
Magenta, Yellow, and Black respectively.)
The toner cartridge for the indicated color
is near the end of its service life. Prepare a
new toner cartridge. (The letters C, M, Y,
and K appear in place of uuuu and
indicate the colors Cyan, Magenta, Yellow,
and Black respectively.)
Setup button on the control panel,
Advertisement
Table of Contents
