Fuser Unit - Epson AcuLaser C4000 Reference Manual

Fuser unit

Prepare a new fuser unit for replacement when you get a message
informing you to do so.
Handling precautions
Note the following handling precautions before replacing the
fuser unit:
Do not touch the surface of the fuser unit. Doing so may
impair print quality.
Warning:
w
Replacing the fuser unit
Follow these steps to replace the fuser unit.
1. Turn off the printer, and wait for 30 minutes until the
temperature has subsided.
The fuser unit can be very hot if the printer has been in use.
Turn the printer off and wait for 30 minutes until the
temperature has subsided before replacing the fuser unit.
Do not dispose of the used fuser unit in fire, as it may explode
and cause injury. Dispose of it according to local regulations.
Keep the fuser unit out of the reach of children.
Maintenance and Transportation
8
8
8
8
8
8
8
8
8
8
8
8
263