Replacement Messages - Epson AcuLaser C1900 Reference Manual

Replacement Messages

When you see the following messages on the LCD panel or the
window of the EPSON Status Monitor 3 utility, replace the
appropriate consumable products. You can continue to print for
a short time after a message appears, but EPSON recommends
early replacement to maintain print quality and extend the life of
your printer.
Control panel
message
XXXX Toner Low*
Worn
Photoconductor
Waste T
BoxNearfull
Worn
TransferUnit
* C, M, Y, and/or K are indicated for the color of the toner to be replaced. For example,
the message Y Toner Low means that the amount of remaining toner in the yellow
developer cartridge is low.
Note:
To clear these messages, select Clear All Warnings in Reset Menu.
240
Replacing Consumable Products
Description
The amount of remaining toner
in the developer cartridge(s) is
low.
The photoconductor unit is
near the end of its service life.
The waste toner collector is
nearly full of toner.
The transfer unit is near the
end of its service life.