Setting Monitored Printers - Epson AcuLaser C4000 Reference Manual

Note:
The Monitor the Printing Status check box is displayed in the
Utility menu of Document Defaults in Windows NT 4.0, or in the
Utility menu of Printing Preference in Windows XP or 2000.
You can find out the current printer status by clicking the EPSON
Status Monitor 3 icon in the printer driver's Utility menu.

Setting Monitored Printers

You can use Monitored Printers utility to change the type of
printers that EPSON Status Monitor 3 will monitor. When you
install EPSON Status Monitor 3, this utility is also installed.
Usually, it is not necessary to change a setup.
1. Click Start, point to Programs, point to EPSON Printers, then
click the Monitored printers.
2. Clear the check box of the printers which are not monitored.
3. Click OK to accept the setting.
Using the Printer Software with Windows
3
3
3
3
3
3
3
3
3
3
3
3
95