Chapter 10 Replacing Consumable Products; Replacement Messages; Imaging Cartridge; Handling Precautions - Epson Aculaser C2800 Series User Manual

Chapter 10
Replacing Consumable Products

Replacement Messages

If a consumable product reaches the end of its service life, the printer stops printing and displays
the following messages on the LCD panel or the window of EPSON Status Monitor. When this
happens, replace the depleted consumable products.
LCD Panel Message
Replace Toner uuuu*
Replace Fuser
Replace Transfer Unit
* The letters C, M, Y, or K appear in this position, indicating the color of the imaging cartridge to be replaced. For
example, the message Yellow Toner Low means that the yellow imaging cartridge is near the end of its service life.
Note:
Messages appear for one consumable product at a time. After replacing a consumable product, check the LCD
panel for replacement messages for other consumable products.

Imaging Cartridge

Handling precautions

Always observe the following handling precautions when replacing the consumable products:
❏ Installing a genuine imaging cartridge is recommended. Using a non-genuine imaging
cartridge may affect print quality. Epson shall not be liable for any damages or problems
arising from the use of consumable products not manufactured or approved by Epson.
❏ When handling imaging cartridge, always place them on a clean smooth surface.
❏ If you have moved an imaging cartridge from a cool to a warm environment, wait for at least
one hour before installing it to prevent damage from condensation.
Downloaded from ManualsPrinter.com Manuals
Description
The imaging cartridge for the indicated color has reached the end of its
service life.
The fuser unit has reached the end of its service life.
The transfer unit has reached the end of its service life.
AcuLaser C2800 Series
Replacing Consumable Products
User's Guide
202