4. Select the PICT file and click Open.
5. Type the file name in the Name box, and click Save.
Note:
To remove the saved watermark, select it from the List box, and click
Delete. After removing it, be sure to click Save to close the dialog
box.
6. Select the saved custom watermark from the Watermark
drop-down list on the Layout dialog box. Then click OK.
Printing with the duplex unit
Duplex printing prints on both sides of the paper. When printing
for binding, the binding edge can be specified as required to
produce the desired page order.
1
Using the Printer Software with Macintosh
1
2
2
5
5
5
5
5
5
5
5
5
5
5
5
143