Using The Control Panel Menus; When To Make Control Panel Settings - Epson AcuLaser C4000 Reference Manual

10 Data light:

Using the Control Panel Menus

You can use the printer's control panel to access a variety of
menus that allow you to check the status of consumable products,
print status sheets, and make printer settings. This section
describes how to use the control panel menus, and when it is
appropriate to make printer settings using the control panel.

When to make control panel settings

In general, printer settings can be made from the printer driver,
and do not need to be made using the control panel. In fact, printer
driver settings override settings made using the control panel, so
use the control panel menus only to make settings you cannot
make in your software or printer driver, including the following:
Changing the emulation modes and selecting the IES
(Intelligent Emulation Switching) mode
Specifying a channel and configuring the interface
Choosing the size of the memory buffer used to receive data
On when print data is stored in the print
buffer (the section of printer memory
reserved for receiving data) but not yet
printed.
Flashing when the printer is processing
data.
Off when no data remains in the print
buffer.
Functions of the Control Panel
6
6
6
6
6
6
6
6
6
6
6
6
165