Advanced Entry Calibration - Datamax Mark II M-4206 Operator's Manual

5.4.3

Advanced Entry Calibration

Note: Advanced Entry Calibration will override all previous calibration settings; this method should be used only when Standard
Calibration has failed.
Advanced Entry Calibration is the alternate method for special-case media types. The procedure has two parts:
1) You must list the sensor readings for the label and TOF values using different algorithms.
2) From your list the best algorithm is chosen, new readings taken and those values entered.
To perform an Advanced Entry Calibration:
Step Operator Action
1
(Media should be loaded and
the appropriate Sensor Type
selected.)
Turn 'On' the printer.
2 Press the
MENU
Raise the printhead assembly.
3
Press the Key to enter
the Media Settings menu.
4
Press the Key and scroll
FWD
to 'Sensor Calibration'.
5
Press the Key.
72
Displayed Message
!
!!
VODBMJCSBUFE!
!
!
NFOV!NPEF!
Key.
NFEJB!TFUUJOHT!
!
!
!
NFEJB!TFUUJOHT!
NFEJB!UZQF!
!
!
!
NFEJB!TFUUJOHT!
TFOTPS!DBMJCSBUJPO!
!
!
TFOTPS!DBMJCSBUJPO!
QFSGPSN!DBMJCSBUJPO!
!
Wait until the printer initializes (about six seconds).
You are entering Menu Mode.
!!
See Section 5.1.2 for menu layout.
!!
Press the
!!
You are entering the calibration submenu.
Comment
Key to abort this procedure.
M-Class