Datamax Mark II M-4206 Operator's Manual page 127

Configuration Using a Static IP Address
Once the Ethernet Print Sever has been installed, p
the printer's power switch 'On'.
1. Verify the printer is in the 'Ready Mode'
2. Press the button to enter the printer's menu.
MENU
3. Using the button scroll to
FWD
button.
4. Using the button scroll to
FWD
button.
5. Using the button scroll to
FWD
button.
6. Using the button scroll to
FWD
button.
7. Press the button once to return to the
level. Then use the
button.
M-Class
'COMMUNICATIONS'
'NIC ADAPTER'
'IP DISCOVERY'
'DISABLED'
'NIC ADAPTER'
button scroll to
'IP ADDRESS'
FWD
lug in the power cord, but do not connect the Ethernet cable, then turn
and press the
and press the
and press the
and press the
menu
and press the
!
XFE!21;27B!13KVM3114!
SFBEZ!
NFOV!NPEF!
NFEJB!TFUUJOHT!
NFOV!NPEF!
DPNNVOJDBUJPOT!
DPNNVOJDBUJPOT!
OJD!BEBQUFS!
OJD!BEBQUFS!
JQ!EJTDPWFSZ!
JQ!EJTDPWFSZ!
+EJTBCMFE!
OJD!BEBQUFS!
JQ!BEESFTT!
117