Table of Contents
Advertisement
CONNECTING YOUR CAMERA TO A COMPUTER/SYSTEM MESSAGES
UNPLUGGING YOUR CAMERA FROM THE COMPUTER
Windows 98/98SE:
Unplug the Mini-USB from the camera directly.
For Windows Me/2000/XP users:
1. Double click the 'Unplug or Eject Hardware' icon
2. The 'Unplug or Eject Hardware' window appears, click Stop button.
3. The 'Stop a Hardware Device' window appears, click OK.
4. The 'Safe to Remove a Hardware' window appears, click OK.
5. Now it is proper and safe to unplug the Mini-USB cable from the camera.
Macintosh:
1. Drag the "CONCORD" removable drive icon on the desktop to the Trash. Or click
on "CONCORD", then click "Eject" under "File" or "Special" (if the mouse is not available).
2. Unplug the Mini-USB cable from the camera.
SYSTEM MESSAGES
Message screen
Message
1) No card is inserted into the
memory card slot.
2) The card has been inserted
No Memory
incorrectly.
Card
3) The card is damaged.
4) The card is not recognizable.
No Memory
The memory is full.
Space
1) No certain type of files.
No File
2) No any file.
The memory card is locked.
Card Lock
The battery is low or fully
Low Battery
depleted.
on the right hand side of your task bar.
Possible Cause
40
Solution
1) Insert a memory card
correctly.
2) Replace it with a new card.
3) Format the card by using
this camera. (p.26)
1) Insert a new memory card.
2) Delete the unwanted files.
3) Transfer all the files onto
your computer and then
format the memory.
Switch to other mode and check
if there is other format's file.
Unlock the memory card.
Recharge the battery (p.3)
Advertisement
Table of Contents
