Table of Contents
Advertisement
GETTING STARTED
STORING SPARE MEMORY CARD
A spare card can be stored aside the battery compartment as shown in the figure below:
Note: Due to the limited space, only a thin card (such as an SD/MMC card) can be stored.
POWER ON /OFF
Power On
Press the Power button for more than 1 second to turn on the Camera. The
LCD will be turned on.
Power Off
Press the Power button for more than 1 second.
Caution:
1. If the Power button is pressed for more than 1 second while data is being
written to the memory card, the Camera will shut down, but the memory
writing will continue until it is finished.
2. If the Power button is pressed for more than 1 second while the camera
can't be turned on, that may because the battery is over. Charge the
battery and then try again.
SETTING THE CAMERA'S OPERATIONAL MODES
The camera has 7 operational modes:
DV: Use this mode to record video clip.
DSC: Use this mode to take still picture.
MP3: Use this mode to play MP3 music.
VR: Use this mode to record audio clip.
PLAY: Use this mode to view the recorded video clips, pictures or
audio clips.
SET UP: Use this mode to adjust the camera settings.
LIGHT: Use this mode to take the camera as a flashlight.
1. Press the MODE button repeatedly to switch among the 7 modes. The mode
selected will be highlighted on the screen.
• You can also press the MODE button first, then press the
2. Press the SET button to enter the selected mode.
Note:
1. While setting mode, the MENU button, the DISPLAY button and the Shutter button are all disabled.
2. When data is being written (shooting videos, taking pictures, or recording voice), the MODE button is
disabled
,
,
or
button to select the desired Mode.
4
Power Button
Advertisement
Table of Contents
