SETTING SLIDE SHOW INTERVAL
The default slide show interval is 1 second. You may change the time following the steps below:
1. In the Set Up mode, press the
2. Press the
button or SET button to enter its submenu.
3. Press the
or
button to select the desired setting: 1 sec, 2 sec, 4 sec, 10 sec, or 30 sec.
4. Press the SET to save the setting. Or press the
setting will not be changed.
SETTING AUTOMATIC TURN-OFF TIME
1. In the Set Up mode, press the
2. Press the
button or SET button to enter its submenu.
3. Press the
or
4. Press the SET to save the setting. Or press the
not be changed.
Note: If Off is selected, the camera will not turn off automatically.
SETTING LCD BACKLIGHT BRIGHTNESS
By default, the LCD brightness is set at Medium. To save battery power, you can set the LCD brightness to
Minimum or Auto.
1. In the Set Up mode, press the
2. Press the
button or SET button to enter its submenu.
3. Press the
or
button to select the desired setting: Auto, Minimum, Medium, or Maximum.
4. Press the SET to save the setting. Or press the
setting will not be changed.
or
button to highlight the Slide Option.
or
button to highlight the Auto Off.
button to select the desired setting: Off, 1 min, 2 min, 3 min, or 5 min.
or
button to highlight the LCD Light.
CUSTOMIZING THE CAMERA SETTINGS (SET UP)
button to exit the submenu. If so, the slide show interval
button to exit the submenu. If so, the auto-off setting will
button to exit the submenu. If so, the LCD brightness
25