Turning The Camera On; Setting The Language, Date, And Time - CONCORD Eye-Q 4062 AF Quick Start Manual

1
LOADING THE BATTERIES AND THE SD MEMORY CARD
fig.1.1
1. Open the Battery/Memory Card door. (fig.1.1)
2. Insert the batteries and the SD memory card (sold separately). (fig.1.2-1.3)
3. Close the door.
2

TURNING THE CAMERA ON

Press and hold the Power button (
Note: To extend battery life,
• The LCD will be off after 1 minute of inactivity. After the LCD is
automatically turned off, the Flash Ready LED blinks. Press any button to
reactivate the LCD.
• The camera will automatically power off after 2 minutes of inactivity. Press
and hold the Power (
back on.
3
SETTING THE LANGUAGE, DATE AND TIME
When the camera is powered on for the first time, the Language, Date and Time menus will appear.
fig. 1.1
1. Press or to highlight the language you would like to use. (fig. 1.1)
2. Press the OK button to select. The next screen shows date/time setup page. (fig. 1.2)
3. Press to highlight the Date field, the Time fields, the Date Format field or the Time Format field. The
selected segment will blink.
• When the Time Format field is reached, keep pressing
4. Press or to change the number in the blinking position.
5. Press the OK button to exit date/time setting. The next screen displays live viewfinder.
DZ5062 QSG(514174-00)-E 2
fig.1.2
) for about 1 second to turn the camera on.
) button for about 1 second to turn the camera
2
3
1
3
5
2
A
AWB
⁄ ⁄
fig.1.3
A
AWB
⁄ ⁄
DATE/TIME SETUP
01 - 01 - 2004
01 : 01 AM
MM - DD - YYYY
12 - HOUR
RETURN OK SET
fig. 1.2
, the cursor will return to the date field.
A
5/31/04, 4:13:39 PM
AWB
A
AWB
⁄ ⁄
2
3