Connecting The Camera To The Computer; Changing The Driver Modes - CONCORD Eye-Q Go Wireless User Manual

CONNECTING THE CAMERA TO THE COMPUTER

Note for all Windows users: Do not connect the camera to the computer
before installing the camera drivers. Please refer to page 60 for instructions.
Note for Windows 98SE, Windows 2000 and Window Me: DirectX must be
installed in order to view your stored video clips on your computer. Please refer
to page 60 for instructions.

Changing the Driver modes

Option
Mass Storage
Drive
ArcSoft
PhotoImpression
ArcSoft
VideoImpression
Microsoft
NetMeeting/
MSN Messenger
Changing the Driver Selection:
1. Turn the camera on.
2. Set the mode switch to (
3. Press the MENU button to display the main menu.
4. Press until Setup is highlighted.
5. Press to enter the Setup submenu.
6. In the Setup menu, press
7. Press to change the setting to Pic or Web.
8. Press the MENU button to exit.
CONNECTING THE CAMERA TO THE COMPUTER
Driver Selection
Pic
Pic
Web
Web
).
until Driver is highlighted.
Description
This mode enables the camera to download
pictures and video clips to the computer
with the Mini-USB cable provided.
This software enables you to download and
edit your stored pictures.
This software enables the camera to record
and edit video clips while the camera is
connected to the computer.
Note: You cannot download video clips that
are stored in the internal memory or the
memory card in this mode. (The pic drive
should be used.)
This mode enables the camera to be a
web camera.
75