Setting The Flash; Taking Video Clips - CONCORD Eye-Q 2040 Quick Start Manual

SETTING THE FLASH

MAIN MENU
Mode
M
Size
Quality
Flash
1. Press the MENU button in the (
2. Press until Flash is highlighted.
3. Press to enter its submenu.
4. Press or
Auto Flash,
A
5. Press the OK button to select.
6. Press the MENU button to exit.

TAKING VIDEO CLIPS

The camera can capture video clips.
To record a video clip:
1. Press the MENU button.
2. Press to enter the Mode menu.
3. Press to enter video clip mode.
4. Position the subject in the viewfinder or LCD.
5. Press the Shutter button to begin recording a continuous video clip.
6. Press the Shutter button again to stop recording. Otherwise the camera will continue
recording until the memory is almost full.
Video Clip Information
Resolution: QVGA
Frame rate: 15fps
File Format: AVI
MAIN MENU
Mode
M
Size
Quality
Flash
) Camera Mode.
to highlight a flash mode:
Fill-in Flash or
MAIN MENU
Mode
M
Size
Quality
Flash
Flash off
MODE
Video Clip
Self-timer
Main Menu
4
TAKING PICTURES
FLASH
Auto
A
Flash
Flash Off
OK MENU