Machine Function Settings; Automatic Reinforcement Stitching - Brother ULT-2003D Operation Manual

MACHINE FUNCTION SETTINGS

Automatic Reinforcement Stitching

After selecting a stitch pattern, turn on the automatic reinforcement stitching function before sew-
ing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending
on the stitch pattern) at the beginning and end of sewing.
5
1
6
5
6
2-14
1. Select a stitch pattern.
2. Press
ing function. The key will display as
Note
Some stitches, such as buttonholes and bar tacks, require
reinforcement stitches at the beginning of sewing. If you
select one of these stitches, the machine will automati-
cally turn on this function (the key appears as
the stitch is selected).
3. Set the fabric in the start position and start sewing. The
machine will automatically sew reverse stitches (or
reinforcement stitches) and then continue sewing.
1 Reverse stitches (or reinforcement stitches)
Note
If you press the "Start/Stop" button to pause sewing, press
it again to continue. The machine will not sew reverse
reinforcement stitches again.
4. Press the "Reverse/Reinforcement Stitch" button. The
machine will sew reverse stitches (or reinforcement
stitches) and stop.
To turn off the automatic reinforcement stitching func-
tion, press
1
1 Reverse stitches (or reinforcement stitches)
Getting Ready to Sew
to set the automatic reinforcement stitch-
again, so it appears as
1 —
2 —
.
3 —
4 —
when
5 —
6 —
7 —
8 —
.
9 —