Darning - Brother ULT-2003D Operation Manual

Brother ult-2003d sewing machines: users manual
Hide thumbs Also See for ULT-2003D:
Table of Contents

Advertisement

Darning

Use this stitch pattern for mending and other applications.
1
2
3
6
1. Select a stitch pattern.
2. Attach buttonhole foot "A" and set the scale to the de-
sired length of the darning.
Note
The maximum length of darning is 30 mm (1-3/16 inch).
1 Presser foot scale
2 Completed measurement
4
3 Width 7 mm (1/4 inch)
4 5 mm (3/16 inch)
3. Check that the needle drops at the desired position and
5
lower the presser foot lever, making sure the upper
thread passes underneath the buttonhole foot.
CAUTION
• Set the presser foot so that there is no gap behind
the section marked with an "A" (in the shaded area
in the illustration to the right). If there is
a gap, the size of the darning will not be
correct.
• Pass the thread underneath the presser
foot.
Sewing Utility Stitches
For medium weight fabrics
For heavyweight fabrics
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
3-57

Advertisement

Table of Contents
loading

Table of Contents