Retrieving A Stitch Design That Has Been Saved - Brother ULT-2003D Operation Manual

Retrieving a Stitch Design That Has Been Saved

Preparation
If the embroidery unit is attached, remove it.
1 Release button
* Turn off the power supply before removing the em-
broidery unit.
1. Press .
2. To retrieve a stitch pattern saved in the machine's
memory, press
To retrieve a stitch pattern saved on a floppy disk, in-
sert the floppy disk, and then press
CAUTION
• Only insert or remove floppy disks while
or
prompted to change disks by a message on the
screen.
• Do not insert anything other than floppy disks
into the floppy disk drive slot, otherwise the
floppy disk drive may be damaged.
• Do not insert a floppy disk containing pattern
data other than those saved using our data de-
sign equipment or a sewing machine, otherwise
the sewing machine may malfunction. (Only
.pes, .phc and .dst pattern files can be used.)
CAUTION
If the settings on this screen are locked (
other than or
My Custom Stitch
.
.
is displayed, or when
), no key
can be operated.
1 —
2 —
3 —
4 —
5 —
7
6 —
7 —
8 —
9 —
7-13