Changing The Thread Color Display - Brother ULT-2003D Operation Manual

Changing the Thread Color Display

5-42
1. Press .
2. In the
color display. You can display the names of the thread colors,
the embroidery thread number, the country embroidery thread
number, the time allotted for embroidering each thread color, or
one of the two custom thread color numbering sets.
* If custom thread numbers have not been set for Custom thread
number 1 or Custom thread number 2, "----" appears. For
details on customizing thread numbering sets, see page 5-43.
NAME OF COLOR
TIME
3. When embroidery data containing custom thread colors speci-
fied with the PE-Design Ver. 5.0 is saved on a floppy disk, the
stored custom thread colors are read as those from the sewing
machine if "ON" is selected for this setting.
* If this function is set to "OFF", the thread color display se-
lected in step 2 is shown.
* As a default, this function is set to "ON".
4. When you have selected the type of display, press
Embroidery
display, use to change the thread
COUNTRY THREAD#
EMBROIDERY
THREAD#
CUSTOM THREAD
CUSTOM THREAD
NUMBER 1
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
NUMBER 2
9 —
.