Selecting A Pattern From A Floppy Disk (Only For Machines With Floppy Disk Drives) - Brother ULT-2003D Operation Manual

Selecting a Pattern from a Floppy Disk (Only for Machines with Floppy Disk Drives)

5-18
1. When the screen at left is displayed, you can insert the floppy
disk.
* If a different screen is showing, press
at left.
* Insert the floppy disk completely into the slot on the right side of
the machine.
CAUTION
• Only insert or remove floppy disks while
is displayed, or when prompted to change disks by the screen.
• Do not insert anything other than floppy disks into the floppy disk
drive slot, otherwise the floppy disk drive may be damaged.
2. Press .
The patterns on the floppy disk are displayed on the selection
screen.
* The time for loading from the floppy disk depends on a number
of patterns. For example, it takes around 30 seconds for 20 pat-
terns to display.
3. The method for selecting patterns is the same as that described
on pages 5-8 to 5-16.
CAUTION
Only use floppy disks containing data created by the sewing ma-
chine, or equipment intended for this machine. Otherwise, the
machine may not operate correctly. (Only .pes, .phs and .dst pat-
tern files can be used.)
Embroidery
to display the screen
1
1 Insert completely.
1 —
2 —
3 —
4 —
5 —
or
6 —
7 —
8 —
9 —