I Presser Foot Lever; I Sewing Speed Controller; I Bobbin Winder Button; I Top Cover - Brother ULT-2003D Operation Manual

I Presser Foot Lever

1

I Sewing Speed Controller

1

I Bobbin Winder Button

I Top Cover

Lower the presser foot lever to lower the presser foot and
apply pressure to the fabric. If the presser foot is raised to
the second position, and you want to sew heavy weight,
stacked fabrics, etc., that are hard to set under the presser
foot, raise the presser foot lever higher and hold it to make
room for the fabric (see page 2-4).
2
1 Presser foot
2 Presser foot lever
CAUTION
The machine will not operate with the presser foot
raised.
Use this controller to adjust the sewing speed. Move the le-
ver to the left to sew at slower speeds. Move the lever to the
right to sew at higher speeds.
1 Lever
Note
Beginners should sew at a slow speed.
1
Use this button to wind the bobbin (see page 1-25).
Open the top cover to wind the bobbin or do the upper
threading. To open the cover, place your hand under the
clear section of the cover and lift up.
Setting Up
2
1 Slow
2 Fast
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
1-5