Changing The Needle - Brother ULT-2003D Operation Manual

1
2
6

Changing the Needle

CAUTION
• Turn the main power switch to OFF before changing the needle. If the main power is
left on and the Start/Stop button or another operation button is pressed accidentally,
the machine will start and injury may result.
• Use only sewing machine needles for home use. Other needles may bend or break and
cause injury.
• Never sew with a bent needle. A bent needle will easily break and cause injury.
To Check the Needle Correctly:
To check the needle, place the flat side of the needle on a flat surface. Check the needle from the
top and the sides. Throw away any bent needles.
1 Parallel space
2 Level surface (bobbin cover, glass, etc.)
5. With the presser foot lever raised, tighten the screw
lightly to attach the presser foot holder.
6. Place the presser foot "J" under the holder. Lower the
presser foot lever and use the screwdriver to tighten
the screw firmly.
Note
If the presser foot holder is not installed correctly, the thread
tension may loosen due to improper presser foot holder
height.
5
CAUTION
• Be careful not to touch the needle during this
• Use the screwdriver to tighten the presser foot
Setting Up
time, otherwise injury may result.
holder screw securely. If the screw is loose,
the needle may strike the presser foot and cause
injury.
* Place a level surface under the needle
1
2
1-43
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —