Adjusting The Sound - BenQ W1060 User Manual

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speakers. Be sure
you have made a correct connection to the projector audio input. See
19 for how the audio input is connected.
INPUT SOUCER
PC
HDMI 1/2
VIDEO
S-VIDEO
COMPONENT
Muting the sound
To temporarily turn off the sound,
• Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display
To restore the sound, press MUTE again.
• Using the OSD menu
1. Press MENU/EXIT and then press
SETUP: Advanced menu is highlighted.
2. Press
The Audio Settings page displays.
3. Highlight Mute and press
4. To restore the sound, repeat steps 1-3 and press
Adjusting the sound level
To adjust the sound level,
• Using the remote control
Press or
• Using the OSD menu
1. Press MENU/EXIT and then press
is highlighted.
2. Press
3. Press
Turning off the Power on/off Ring Tone
1. Repeat steps 1-2 above.
2. Press
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power on/off ring tone.
42 Operation
in the upper right corner of the screen.
to highlight Audio Settings and press ENTER.
/
to select a desired sound level.
to highlight Audio Settings and press ENTER. The Audio Settings page displays.
to highlight Volume and press
to highlight Power on/off ring tone and press
AUDIO IN
mini jack
HDMI
RCA
RCA
RCA
/ until the SYSTEM
to select On.
/ to select Off.
/ until the SYSTEM SETUP: Advanced menu
/ to select a desired sound level.
"Connections" on page
AUDIO OUT
mini jack
mini jack
mini jack
mini jack
mini jack
/ to select Off.