Magnifying And Searching For Details; Selecting The Aspect Ratio - BenQ W1060 User Manual

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
1. Press MENU/EXIT and then press
2. Press
3. Press
4. To navigate the picture, press MODE/ENTER to switch to the paning mode and press
the directional arrows ( ,
5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out
functionality, and press AUTO to restore the picture to its original size. You can also
press
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
Selecting Color Space Conversion
Highlight Color Space Conversion in the DISPLAY menu and select by pressing
the projector or remote control.
Select an appropriate color matrix type from among Auto/RGB/YUV.
This function is only available with HDMI input source.

Selecting the aspect ratio

The 'aspect ratio' is the ratio of the image width to the image height. For W1060, the default
aspect ration is 16:9. Most analog TV and computers are in 4:3 ratio, and digital TV and
DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):
1. Press MENU/EXIT and then press
2. Press
3. Press /
display requirements.
32 Operation
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays.
on the projector repeatedly to magnify the picture to a desired size.
,
repeatedly until it is restored to the original size.
to highlight Aspect Ratio.
to select an aspect ratio to suit the format of the video signal and your
/ until the DISPLAY menu is highlighted.
, ) to navigate the picture.
/ until the DISPLAY menu is highlighted.
/ on