Controls And Functions - BenQ W1060 User Manual

Controls and functions

Projector
1
2
3
4
5
6
1. FOCUS/ZOOM Ring
Used to adjust the projected image
appearance. See
and clarity" on page 31
2. POWER indicator light
Lights up or flashes when the projector is
under operation. See
58 for details.
3. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using the menus" on page 26
details.
4. Left/Decrease volume level
Decreases volume. See
sound level" on page 42
5. POWER
Toggles the projector between standby
mode and on.
See "Starting up the projector" on page 25
and "Shutting down the projector" on page
43 for details.
6. BLANK
Used to hide the screen picture. See
the image" on page 40
10 Introduction
"Fine-tuning the image size
for details.
"Indicators" on page
for
"Adjusting the
for details.
"Hiding
for details.
7. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
7
"Indicators" on page 58
8
8. Keystone/Arrow keys
9
( / Up,
Manually corrects distorted images
10
resulting from an angled projection. See
"Correcting keystone" on page 31
11
details.
12
9. LAMP indicator light
13
Indicates the status of the lamp. Lights up
8
or flashes when the lamp has developed a
problem. See
details.
10. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 30
details.
11. Right/Increase volume level
Increases volume. See
sound level" on page 42
When the On-Screen Display (OSD)
menu is activated, the #4, #8 and #11 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See
page 26 for details.
12. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page 35
for details.
Enacts the selected On-Screen Display
(OSD) menu item. See
on page 26 for details.
13. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 29
details.
for details.
/ Down)
for
"Indicators" on page 58
"Adjusting the
for details.
"Using the menus" on
"Using the menus"
for
for
for