Connecting Hdmi Source Devices - BenQ W1060 User Manual

Connecting HDMI source devices

The projector provides a HDMI input jack that allows you to connect it to a HDMI source
device like a DVD player, a DTV tuner or a display.
HDMI (High-Definition Multimedia Interface) supports uncompressed video data
transmission between compatible devices like DTV tuners, DVD players and displays over a
single cable. It provides pure digital viewing and listening experience.
Examine your Video source device to determine if it has a set of unused HDMI output jacks
available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an HDMI source device:
1. Take a HDMI cable and connect one end to the HDMI output jack of the HDMI
source device. Connect the other end of the cable to the HDMI signal input jack on the
projector. Once connected, the audio can be controlled by the projector On-Screen
Display (OSD) menus. See
The final connection path should be like that shown in the following diagram:
AV device
In the unlikely event that you connect the projector to a DVD player and the projected picture
displays wrong colors, please change the color space to a suitable selection (RGB/YUV). See
"Changing Color Space" on page 29
"Audio Settings" on page 50
HDMI
HDMI cable
for details.
for details.
COMPUTER
PC
COMPONENT S-VIDEO VIDEO HDMI-1 HDMI-2
RS-232
USB
L AUDIO R
AUDIO
OUT IN
HDMI HDMI
Connections 21