BenQ SH910 User Manual page 67

FUNCTION
Language
Projector
Position
Menu
Settings
Operation
Settings
DESCRIPTION
Sets the language for the On-Screen Display (OSD) menus. See
the menus" on page 25
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position
Sets the On-Screen Display (OSD) menu position.
Reminder Messge
Sets whether to display the reminder message.
Direct Power On
Selecting On enables the function. See
page 22 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
page 74 for details.
Quick Cooling
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 34 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
for details.
"Choosing a location" on page 15
"Starting up the projector" on
"Setting Auto Power Off " on
"Using
for details.
"Hiding the image" on
Operation 67