Controls And Functions - BenQ SH910 User Manual

Controls and functions

Projector
1
2
3
4
5
6
7
3
1. Focus ring
Adjusts the focus of the projected image.
See "Fine-tuning the image size and clarity"
on page 24 for details.
2. Zoom ring
Adjusts the size of the image. See
tuning the image size and clarity" on page
24 for details.
3. Keystone/Arrow keys (
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 24
details.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5. Volume/Arrow keys (
Right)
Adjusts the sound level.
When the On-Screen Display (OSD) menu
is activated, the #3 and #5 keys are used as
directional arrows to select the desired
menu items and to make adjustments. See
"Using the menus" on page 25
10 Introduction
8 9
/ Up,
/ Left,
for details.
6. BLANK
Used to hide the screen picture. See
"Hiding the image" on page 34
7. TEMPerature indicator light
Lights up red if the projector's
12
temperature becomes too high. See
11
"Indicators" on page 79
5
I
8. Power/POWER indicator light
I
10
Toggles the projector between standby
mode and on.See
projector" on page 22
the projector" on page 38
Lights up or flashes when the projector is
under operation. See
79 for detail.
9. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
"Fine-
problem. See
details.
10. Source
/
Displays the source selection bar. See
"Switching input signal" on page 28
details.
11. AUTO
for
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 23
details.
12. MODE/ENTER
Selects an available picture setup mode.
See
/
for details.
Activates the selected On-Screen Display
(OSD) menu item. See
on page 25
for details.
"Starting up the
and
"Indicators" on page
"Indicators" on page 79
"Selecting a picture mode" on page 31
"Using the menus"
for details.
for details.
"Shutting down
for details.
for
for
for