Connecting Video Source Devices - BenQ SH910 User Manual

Connecting Video source devices

You need only connect the projector to a Video source device using just one of the above
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the Video source device as described below:
Terminal
name
HDMI
Component Video
S-Video
Video
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
• In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color
space to YUV. See
Terminal appearance
HDMI
COMPONENT
S-VIDEO
VIDEO
"Changing Color Space" on page 28
Picture quality
Best
Better
Good
Normal
for details..
Connection 21