Remote Control - BenQ SH910 User Manual

Remote control

1
2
3
4
5
6
7
8
19
7
9
10
11
12
13
1. ON
Turns on the projector. See
projector" on page 22
2. COMPUTER
Displays RGB (PC)/Component video
(YPbPr/ YCbCr) signal.
3. HDMI
Displays HDMI signal.
4. S-VIDEO
Displays S-video signal.
5. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
the menus" on page 25
6. BLANK
Used to hide the screen picture. See
the image" on page 34
7. Keystone/Arrow keys (
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 24
details.
12 Introduction
14
15
16
17
18
19
20
21
22
23
24
25
"Starting up the
for details.
"Using
for details.
"Hiding
for details.
/ Up, /
for
8. MODE/ENTER
Selects an available picture setup
mode. See "Selecting a picture mode" on
page 31 for details.
Activates the selected On-Screen
Display (OSD) menu item. See
the menus" on page 25
9. ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size. See
searching for details" on page 29
details.
Page Up/Down
10.
Page up/down arrows when connected
through USB to a PC. See
paging operations" on page 34
11. FREEZE
Freezes the projected image. See
"Freezing the image" on page 34
details.
12. Network Setting
Enables Network Settings OSD menu.
13. TEST
Displays the test pattern. See
Pattern" on page 70
14. OFF
Turns off the projector. See
down the projector" on page 38
details.
15. VIDEO
Displays vidoe signal.
16. NETWORK
Enables the network mode.
17. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 28
details.
"Using
for details.
"Magnifying and
for
"Remote
for details.
for
"Test
for details.
"Shutting
for
for