BenQ SH910 User Manual page 30

Benq sh910: user guide
Hide thumbs Also See for SH910:
Table of Contents

Advertisement

Using the remote control
1.
Press ASPECT to show the current setting.
Press ASPECT repeatedly to select an aspect ratio to suit
the format of the video signal and your display
requirements.
Using the OSD menu
1.
Press MENU/EXIT and then press
DISPLAY menu is highlighted.
2.
Press
3.
Press
display requirements.
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
1.
Auto: Scales an image proportionally to fit the
projector's native resolution in its horizontal or
vertical width. This is suitable for the incoming
image which is neither in 4:3 nor 16:9 and you want
to make most use of the screen without altering the
image's aspect ratio.
Real:
2.
resolution, and resized to fit within the display area.
For input signals with lower resolutions, the
projected image will display smaller than if resized
to full screen. You could adjust the zoom setting or
move the projector towards the screen to increase
the image size if necessary. You may also need to
refocus the projector after making these
adjustments.
3.
4:3: Scales an image so that it is displayed in the
center of the screen with a 4:3 aspect ratio. This is
most suitable for 4:3 images like computer
monitors, standard definition TV and 4:3 aspect
DVD movies, as it displays them without aspect
alteration.
4.
16:9: Scales an image so that it is displayed in the
center of the screen with a 16:9 aspect ratio. This is
most suitable for images which are already in a 16:9
aspect, like high definition TV, as it displays them
without aspect alteration.
5.
16:10: Scales an image so that it is displayed in the
center of the screen with a 16:10 aspect ratio. This is
most suitable for images which are already in a 16:9
aspect, like high definition TV, as it displays them
without aspect alteration.
30
Operation
to highlight Aspect Ratio.
/
to select an aspect ratio to suit the format of the video signal and your
The image is projected as its original
/
until the
4:3 picture
16:9 picture
4:3 picture
4:3 picture
16:9 picture
16:10 picture

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents