What To Do If The Hob Malfunctions - Fagor 6CFI-4GLS Manual


Ensure that the burner body, particularly
near the nozzle, is always clean. Dirt
accumulating around the nozzles 3 (fig.16)
may clog it, as a result of which the burner
will not light or will light only with a faint
flame. To clean the nozzles use a brush
soaked in solvent (fig. 17).

Dry the cleaned burners carefully as wet
elements may not light or cause the gas to
combust improperly. Assemble dry burners
carrying out the disassembling steps in the
reverse order, taking care not to damage
the ignitors and thermo-couples' tips.

5 WHAT TO DO IF THE HOB MALFUNCTIONS

 During use some malfunctions of the hob may occur. The user can make small repairs
without calling a qualified technician, following the guidelines stated in table3.
 In the warranty period all repairs except for the ones specified below should be carried out
by the authorised Servicing Point.
 After the warranty period ends the user should request the servicing point to conduct
periodical inspections of the appliance.
EN 15
Fig.17
Fig.18