The Use Of The Burners; Operation Principles - Fagor 6CFI-4GLS Manual

3 THE USE OF THE BURNERS

Before switching on a burner make sure that
the knob you are going to use corresponds to
the burner you wish to switch on

3.1 OPERATION PRINCIPLES

THE USE OF THE BURNERS
 Do not remove pan supports and place pans directly on burners.
 Do not open the gas supply system valve or cylinder valve without making sure that all
taps are closed.
 The tips of ignitors and thermocouples should always be kept clean and dry to ensure
their correct functioning.
 Do not touch hot burners or hotplate, pan supports or pans placed on them.
 Do not hit the taps, burners, hotplate, ignitors or thermocouple tips.
 Prevent spillage and the flooding of burners and hotplate.
 In the case of hobs with flame failure device please remember to keep the knob pressed
ca. 10s longer after lighting the burner for the device to become activated.
 Do not overload the pan supports.
Correct and power-efficient use of burners can be ensured by
– setting a proper size of the flame
– correct choice of utensils.
SELECTING THE FLAME
 The flow of gas in individual burners is opened by means of gas taps' knobs.
 The flame should not lick around from the bottom of a pan but cover only 2/3 of its
surface. This will reduce the gas consumption and prevent the flame from soiling the
utensils.
EN
Fig. 12
11