Table of Contents
Advertisement
Chapter 5 - Configuration Via Web Interface
"Run Tests"/"Stop Tests" buttons at the bottom of the page start/stop the
performance tests.
"Exit Test" button returns to the "Device Status" page. Test results will be deleted
after pressing "Exit Test" button.
Each row corresponding to a certain bitrate value can be selected or deselected for
participating in the performance test by using a check-box on the right of it. By
using "Select all" check-box all the bitrates could be selected/deselected at once.
Three more parameters are available for management:
"Bi-directional" check-box that allows choosing between making bi-directional
(when checked) and unidirectional (unchecked) performance tests.
"Use mint" check-box allows performing "real-life" testing when all the traffic
and link parameters are controlled and managed by MINT functions such as
ATPC and autobitrate (in ordinary test ATPC and autobitrate are not used). In
this mode the statistics for errors and retries is not available.
Alvarion BreezeNET B130/B300 GigE
Figure 5-15: Performance Test
86
Device Status
Technical User Manual
Hide quick links:
Advertisement
Table of Contents
