Clear Service Id Mesh-Sdp Ingress-Vc-Label - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

clear service id mesh-sdp ingress-vc-label

Clears the static MPLS VC label used by the far-end router to send packets to this router.
clear service id service-id mesh-sdp sdp-id[:vc-id]} ingress-vc-label
Syntax Definitions
service-id
sdp-id
vc-id
Defaults
parameter
vc-id
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use this command to clear ingress VC label information for the specified service-SDP association.
Examples
-> clear service id 10 mesh-sdp 20 ingress-vc-label
-> clear service id 20 mesh-sdp 30:10 ingress-vc-label
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls mesh-
sdp ingress vc-label
show service ingress-label
MIB Objects
sdpBindTable
sdpBindId
sdpBindType
sdpBindAdminIngressLabel
page 50-72
An existing VPLS ID number.
An existing SDP ID number.
A VC ID number that identifies the VC ID portion of each mesh SDP
binding defined for the service.
default
service-id value
Configures the static MPLS VC label used by the far-end router to send
packets to this router using the specified service and SDP binding.
Displays the services that are using a specific ingress label or a range of
ingress labels.
Virtual Private LAN Service (VPLS) Commands
OmniSwitch CLI Reference Guide June 2012