License Apply - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

license apply

Activates the license for licensed protocols on the switch.
license apply
Syntax Definitions
NA
Defaults
By default licensed protocols are not activated on the switch.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Currently, MPLS is the only licensed feature on an OmniSwitch.
•
Ensure the license file lmLicense.dat is placed in the /flash directory of the primary CMM.
•
When the license apply command is issued, the switch displays a message to ensure the installation.
Enter ' ' to apply the license and reboot the switch.
Y
•
Use show license file
Examples
-> license apply
The switch will reboot after the license is applied.
Are you sure you want to proceed(Y/N)?
Y
Release History
Release 6.4.2; command was introduced.
Related Commands
show license info
show license file
MIB Objects
aluLicenseManagerApplyLicense
page 54-62
command to verify the installed license.
Displays all the licensed applications installed on the switch.
Displays the license file information of the switch.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide June 2012