The Configuration Manager feature allows you to configure your switch using an ASCII-based text file.
CLI commands may be typed into a text document—referred to as a configuration file—and then uploaded
and applied to the switch.
MIB information for the Configuration Manager commands is as follows:
Filename:
AlcatelIND1System.mib
Module:
Alcatel-IND1ConfigMgr.mib
A summary of the available commands is listed here:
configuration apply
configuration error-file limit
show configuration status
configuration cancel
configuration syntax check
configuration snapshot
show configuration snapshot
write terminal
OmniSwitch CLI Reference Guide
60 Configuration File
Manager Commands
June 2012
page 60-1