Session Banner - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

session banner

Sets or resets the file name of the user–defined banner. The banner is a welcome banner that appears after
the user sucessfully logs onto the switch.
session banner {cli | ftp | http} file_name
session banner no {cli | ftp | http}
Syntax Definitions
cli
ftp
http
file_name
Defaults
•
A default banner is included in one of the switch's image files. It is automatically displayed at login so
no configuration is needed.
•
The user has the option of defining a custom supplementary banner or of using the default banner.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
The session banner no command is used to disable a user defined session banner file from displaying
when you log onto the switch. The text file containing the custom banner will remain on the switch
until you remove it with the
•
The session banner command is used to configure or modify the banner file name. You must use a text
editor to edit the file containing the banner text.
Examples
-> session banner cli/switch/banner.txt
Release History
Release 6.1; command was introduced.
Release 6.1.3; http keyword was added.
OmniSwitch CLI Reference Guide
Creates/modifies the CLI banner file name.
Creates/modifies the FTP banner file name.
Creates/modifies the HTTP banner file name.
Banner file name including the path from the switch's /flash directory.
The maximum length of the filename and path is 255 characters.
rm command.
June 2012 page 57-5