Configuration Snapshot - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Configuration File Manager Commands

configuration snapshot

Generates a snapshot file of the switch's non-default current running configuration. A snapshot can be
generated for all current network features or for one or more specific network features. A snapshot is a
single text file that can be viewed, edited, and reused as a configuration file.
configuration snapshot feature_list [path/filename]
Syntax Definitions
feature_list
snapshot-supported features
802.1q
aaa
aip
all
bgp
bridge
chassis
health
interface
ip
ip-helper
ip-routing
netsec
path/filename
Defaults
If a file name is not specified, the default file name asc.#.snap is used. Here, # indicates the order in
which the default file is generated. For example, the first default file name to be generated is asc.1.snap,
the second default file name to be generated is named asc.2.snap, etc. By default, all snapshot files are
placed in the root /flash directory.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
OmniSwitch CLI Reference Guide
The description for the network feature(s) to be included in the
snapshot. You may enter more than one network feature in the
command line. Current snapshot-supported network features are listed
below.
ipmr
ipms
ipx
ipv6
linkagg
module
ntp
ospf
ospf3
pmm
policy
qos
A user-defined name for the resulting snapshot file. For example,
test_snmp_snap. You may also enter a specific path for the resulting
file. For example, the syntax /flash/working/test_snmp_snap places
the test_snmp_snap file in the switch's /flash/working directory.
June 2012
rdp
rip
ripng
session
slb
snmp
stp
system
vlan
vrrp
webmgt
udld
page 60-11