Show Snmp Mib Family - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show snmp mib family

Displays SNMP MIB information. Information includes MIP ID number, MIB table name, and command
family.
show snmp mib family [table_name]
Syntax Definitions
table_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
If a table name is not specified in the command syntax, all MIB table names will be displayed.
•
If the command family is not valid for the entire MIB table, the command family will be displayed on a
per-object basis.
•
Table names are case-sensitive. Therefore, use the exact table names from the MIB database.
Examples
-> show snmp mib family trapStationTable
MIP ID MIB TABLE NAME
-------+----------------------------------------+---------------------
73733 trapStationTable
output definitions
MIP ID
MIB Table Name
Family
Release History
Release 6.1; command was introduced.
Related Commands
show snmp trap filter
page 61-18
The name of the MIB table to be displayed.
Identification number for the MIP associated with this MIB Table.
Name of the MIB table.
Command family to which this MIB table belongs.
Displays the SNMP trap filter information.
FAMILY
snmp
OmniSwitch CLI Reference Guide
SNMP Commands
June 2012