Viewing Policy Bindings - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
exceed actions.
• Aggregate Policer — User-defined aggregate policers.
• Ingress Committed Information Rate (CIR) — CIR in bits per second. This field
is only relevant when the Police value is Single.
• Ingress Committed Burst Size (CBS) — CBS in bytes per second. This field is
only relevant when the Police value is Single.
• Exceed Action — Action assigned to incoming packets exceeding the CIR. This
field is only relevant when the Police value is Single. Possible values are:
• Drop — Drops packets exceeding the defined CIR value.
• Remark DSCP — Remarks packets' DSCP values exceeding the defined CIR
value.
CLI – The following is an example of the CLI commands used to bind policies:
Console# show policy-map
4-474
Policy Map policy1
class class1
set Ip dscp 7
Policy Map policy2
class class 2
police 96000 4800 exceed-action drop
class class3
police 124000 96000 exceed-action policed-dscp-transmit

Viewing Policy Bindings

The Policy Binding Page provides parameters for defining policies.
Command Attributes
• Interface — Select the type of unit for which policy information is displayed. The
possible field values are:
– Unit IDs — Displays the stacking members and their policy names.
– LAGs — Displays the LAGs and their policy names.
The Policy Binding table contains the following fields:
• Interface — Selects an interface.
• Policy Name — Contains a list of user-defined policies that can be attached to the
interface.
• Remove — Removes policies.
• Checked — Removes the selected policies.
• Unchecked — Maintains the policies.
250