3
Configuring the Switch
• Line — Authenticates the user using a line password.
• Enable — Authenticates the user using an enable password.
• TACACS+ — Authenticates the user at the TACACS+ server.
• Remove — Removes the selected authentication profile. The possible field values
are:
• Checked — Removes the selected authentication profile.
• Unchecked — Maintains the authentication profiles.
• Profile Method —
• Login — Specifies the user-defined authentication profile list for login
passwords.
• Enable — Specifies the user-define authentication profile list for enable
passwords.
Web – Click System, WebViewMgmt, Authentication, Authentication Profiles, define
the fields, and click Apply.
CLI – The following is an example of the CLI commands used for configuring
110
Figure 3-46. Authentication Profiles Page