Figure 3-93. Dynamic Addresses Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
Command Attributes
• Address Aging — Specifies the amount of time the MAC address remains in the
Dynamic MAC Address table before it is timed out, if no traffic from the source is
detected. The default value is 300 seconds.
• Clear Table — If checked, clears the MAC address table.
In the Query By table, the following fields are query filter options. In the Current
Address Table, the following fields are parameters of the MAC address entries.
• Interface — Specifies the interface for which the table is queried. There are two
interface types from which to select.
• MAC Address — Specifies the MAC address for which the table is queried.
• VLAN ID — Specifies the VLAN ID for which the table is queried.
• Address Table Sort Key —Specifies the means by which the Dynamic MAC
Address Table is sorted. The address table can be sorted by address, VLAN, or
interface.
Web – Click Layer 2, Address Table, Dynamic Addresses. Specify the search type,
select the sorting method and click Query.
CLI – The following is an example of the CLI commands used to define dynamic
190

Figure 3-93. Dynamic Addresses Page