Defining Sntp Servers; Figure 3-13. Sntp Authentication Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
• Authentication Key — Indicates the key used for authentication.
• Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected
(Broadcast) to authenticate the SNTP server.
• Remove — Removes Encryption Key IDs. The possible field values are:
• Checked — Removes the selected Encryption Key ID
• Unchecked — Maintains the Encryption Key IDs. This is the default value.
Web – Select System, System Management, SNTP, Authentication. Define the fields
and click Apply.
CLI - The following is an example of the SNTP authentication commands:
Console(config)# sntp authentication-key 8 md5 ClkKey
4-353
Console(config)# sntp trusted-key 8
4-354
Console(config)# sntp authenticate
4-353

Defining SNTP Servers

The SNTP Servers Page contains information for enabling SNTP servers, as well as
adding new SNTP servers. In addition, the SNTP Servers Page enables the device
to request and accept SNTP traffic from a server.
Command Attributes
• SNTP Server — Displays user-defined SNTP server IP addresses. Up to eight
SNTP servers can be defined.
• Poll Interval — Indicates whether or not the device polls the selected SNTP server
for system time information.
54

Figure 3-13. SNTP Authentication Page