Configuring Triple Play; Figure 3-116. Multicast Tv Membership Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
Note:
Ports and trunks are assigned to Multicast VLAN in the Interface Configuration
Page.
Command Attributes
• Multicast TV VLAN ID — Indicates the Multicast VLAN ID to which the source
ports and receiver ports are members.
• Receiver Ports — Indicates the port on which Multicast TV transmissions are
received.
• Transceiver Ports — Indicates the source port from which the Multicast TV
transmission originates. The source port is learned through the IGMP messages.
Web – Click Layer 2, Multicast, Multicast TV, Multicast TV Membership, click Add,
define the fields, and click Apply.
CLI – The following is an example of the Multicast TV Membership CLI commands:
console(config)# switchport customer vlan
4-627
Console# show vlan multicast-tv vlan 1000
4-690
Source ports
-------------
1/8, 1/9 2/1-18, 3/1-18, 4/1-18

Configuring Triple Play

Network Manager can enhance Multicast TV services using the Triple Play
230

Figure 3-116. Multicast TV Membership Page

Receiver Ports
-----------------------------------------
10