Configuring Multiple Hosts; Figure 3-73. Port Authentication Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
CLI – The following is an example of the Port Authentication CLI commands:
dot1x re-authenticate ethernet
Console#
4-267
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x port-control auto
4-266
Console(config-if)#
4-267
Console(config-if)#
4-268
Console(config-if)#
Console(config-if)#
4-270
Console(config-if)#
4-271
Console(config-if)
4-272
Console(config-if)#
4-273

Configuring Multiple Hosts

The Multiple Hosts Page allows network managers to configure advanced
port-based authentication settings for specific ports and VLANs.
Command Attributes
• Unit No. — Indicates the stacking member for which the Multiple Hosts information
is displayed.
160

Figure 3-73. Port Authentication Page

dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
# dot1x timeout supp-timeout
dot1x timeout server-timeout
1/e16
3600
3600
6
3600
4-376
300
4-269
3600