CLI – The following is an example of the IP Based ACL CLI commands:
Console(config)#
4-300
Console(config-ip-al)#
Defining IP Based Access Control Lists
The IP Based ACL Page contains information for defining IP Based ACLs, including
defining the ACEs defined for IP Based ACLs.
Command Attributes
• ACL Name — Displays the user-defined IP based ACLs.
• Remove ACL — Removes the IP based ACLs. The possible field values are:
• Checked — Removes the selected IP based ACL.
• Unchecked — Maintains the IP based ACLs.
• ACE Priority — Indicates the ACE priority that determines which ACE is matched
to a packet based on a first-match basis. The possible field value is 1-2147483647.
• Protocol — Creates an ACE based on a specific protocol.
• Select from List — Selects a protocol from a list on which ACE can be based.
Some of the possible field values are:
• Any — Matches the protocol to any protocol.
• IDRP — Matches the packet to the Inter-Domain Routing Protocol
(IDRP).
• RSVP — Matches the packet to the ReSerVation Protocol (RSVP).
• PIM — Matches the packet to Protocol Independent Multicast (PIM).
Figure 3-77. ACL Binding Page
ipaccess-list
Defining Access Control Lists
ip-acl1
3
169